Foxconn P67A Series Uživatelský manuál stáhnout pdf (Strana 80)

Intel

Matrix Storage Manager

The Intel

Matrix Storage Manager technology supports RAID 0 ,RAID 1, RAID 5, and

RAID 10 (0+1) functions. It allows you to get high performance with fault tolerance, big

capacity, or data safety provided by different RAID functions.

In this section, we will use four SATA hard disks as an example to guide you how to

congure your RAID system. There are two 149.0GBs and two 74.5GBs. A creation of

second volume will also be well described.

In each screen, there is also a message bar about each key’s function, such as <Tab>,

<Enter>, <Del>...etc. it is to help making your selection easier.

The topic will be introduced :

Installing a new Windows XP in a brand new RAID system.

Steps to Install Serial ATA Hard Disks :

1. Install SATA hard disks into the drive bays.

2. Connect one end of the SATA cable to motherboard’s SATA connector, and the

other end to SATA hard disk.

3. Connect SATA power cable to the power connector of SATA hard disk.

Before installing the SATA hard disks, make sure to turn off the computer

and unplug the power cord from the power outlet to prevent damage to the

hardware.

■ Both AHCI and RAID modes need to install Intel

Matrix Storage Manager

driver.

■ Set SATA mode in BIOS to AHCI, you can skip RAID BIOS creation steps,

but the software driver installation of Intel

Matrix Storage Manager shall

follow the same rule as described for RAID.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 114 115

Žádné komentáře

Foxconn P67A Series Uživatelský manuál Strana 80